You might assume that if your iPhone won’t switch on, you’ll have to buy a new one. That may be true if the problem is severe enough, but there are a number of things you may try before declaring your iPhone dead. If your iPhone is not switched on, consider these six steps to get it working again.
Table of Contents
Troubleshooting
- Plug your iPhone into the power outlet. While holding down the volume down button on your iPhone’s keypad, hold down the power button until the Apple logo appears on your iPhone. When you see the Apple logo, your iPhone should turn on. Photo: Kevin Purdy (Unsplash) Advertisement.
- Perform a complete backup of your iPhone by plugging it into your computer, using iTunes, and making an appointment with your iPhone’s Apple Store service center.
- On your iPhone, open the Control Center by swiping down from the top, tapping the Settings icon, and then selecting the Radio button. You should see the radio button which says Power Off.
TroubleshootingThe Battery
If you turn on the iPhone and it won’t turn on, that’s probably the problem. The battery may be drained or there may not be enough power left to power the processor. On some iPhone models, you may have to restore your phone, restore the battery, or replace the battery. All three of those procedures will likely put a serious dent in the iPhone’s battery life, but they’ll bring it back. iFixit Try a battery charge or reset. If you have the latest iPhone, you can try a battery charge or reset first. If that doesn’t work, Apple offers iPhone battery replacement online. If you want to try to charge your battery first, you can use a third-party charger, but that can be tricky. Run a Diagnostic Test Once your iPhone is back on, open up the Settings app.
TroubleshootingThe Power Button
If your iPhone won’t switch on, or at least make any noise, you’ll probably want to look at your iPhone’s power button. Click on it, and you’ll see a button to hold down for three seconds to make your iPhone display the Apple logo, with an electrical charge going through it. You can then press it again to turn it off. If it doesn’t work, you can try a few other things, but for the time being, just press the button. Flipping the Power Off Switch Sometimes, your iPhone will switch off by itself. You can press the power button and hold it until it turns off. Don’t try to turn it on, because it may be too late. (If you have an Apple Watch, press the side button.
TroubleshootingThe Wifi
It might be that your iPhone’s wireless chip is having trouble transferring data to the router. For example, it might be incompatible with an older router that doesn’t support the latest standards, like Wi-Fi 7 or 802.11ax. To troubleshoot, open the Settings app and tap on “Airplane Mode.” Then tap “Airplane Mode” again and tap “Wifi.” If your iPhone still isn’t connecting to the router, your wireless chip might be dying. RELATED: How to Boost Your iPhone’s Battery Life You could also try unplugging your iPhone from the charger for at least 10 minutes before you turn it on again. After that, try plugging it in again and re-setting its Wi-Fi connection. If your iPhone still doesn’t work, it’s most likely a dead battery, so your next step is to charge it again and try it.
Troubleshooting The Home Button
If the problem occurs after a software update, consider the possibility of an app stuck in a fatal hang. To open the iOS Settings app on your iPhone, hold down the Sleep/Wake button, and then press and hold the Home button. You should be presented with the Device Menu and battery gauge, the latter of which lets you see the state of your battery’s charge. Look for the Unknown Sources option to view or turn off apps you don’t want on your iPhone. This is especially important if your iPhone is first connected to an unfamiliar Wi-Fi network, or if you’re using a 3G connection. If the problem occurs before a software update, Apple’s support site has a handy procedure for checking to see whether a future update fixed the problem.
TroubleshootingThe Screen
The simplest way to diagnose a blank screen on your iPhone is to take a look at the top layer of the screen. If you tap on the screen, you will usually see a light indicator in the status bar at the top right of the display that is usually a dot with an arrow pointing up. The light indicator indicates the status of your screen—off means the screen has not turned on. Since the icon can also appear when your iPhone is in airplane mode, your best bet is to open the Airplane Mode menu. Tap on the icon, and you will find a list of options including airplane mode and airplane screen timeout. To determine whether the light is illuminated, simply flip your phone over and press on the screen. If you see a white screen, that means the screen has turned on.
Conclusion
We hope this article helps you solve your iPhone problem. If your phone still won’t turn on and restart, we recommend that you take it to a computer or an Apple store for a checkup. Your mileage may vary. If you have another idea for your problem, we’d like to hear about it in the comments below or Visit mobile repair dubai services.